Kawasaki GPB300D is the 30MWe open cycle, twin shaft type gas turbine which comprise of 14 stage axial flow compressor and 2+3 stage axial turbines. The gas turbine generator set consists of gas turbine engine, engine control system, generator and the package auxiliary system such as reduction gear, coupling, and lubrication, starting and turning system. It is equipped with a dual ignition and eight can combustion system. There are 2 types of model for this series which is GPB300 (conventional diffusion) and GPB300D (dry low emission) . The applicable fuel for GPB300 is Natural Gas.
Light weight cogeneration system for Industrial Application
|Electrical Output||17,970 kW|
|Heat Rate||10,690 kW|
|Exhaust Gas Temperature||545 ℃|
|Exhaust Gas Mass Flow||213 x10³ kg/hr|
|HRSG Steam Output||39.7 x10³ kg/hr|
|Total Thermal Efficiency||84%|
|NOx (02 : 15%)||15 ppm|
|Approximate Package Dimension (L,W,H)||17.2 x 3.5 x 3.4|
|Approximate Package Weight (dry)||131|
- Elevation 0m
- Inlet air temperature 15℃
- Inlet air pressure loss 0.98kPa
- Exhaust gas pressure loss 3.43kPa
- LHV of Natural Gas Fuel(100% CH4) 35.9MJ/Nm3
- Typical Steam Condition: Steam pressure 0.83MPaG, Steam temperature(saturated) 177℃, Feed water temperature 80℃, Blowdown from HRSG 0%
Note: Mark “D” means Dry Low Emission
Here’s how KGA help with your solution.
We’ll help you to size and design the right energy solution according to your needs.
We’ll work with qualified local partner for the cost-effective installation.
We’re always available to support the necessary services.