Kawasaki GPB 15 is 1.5MWe simple open cycle, single shaft type gas turbine generator which comprise of 2 stage centrifugal compressor and 3 stage axial turbines. The gas turbine generator set consists of gas turbine engine, engine control system, generator and the package auxiliary system such as reduction gear, coupling, lubrication, starting and turning system. The combustor for this gas turbine is a single can, single ignition type. There are 2 types of model for this series which is GPB15 (conventional diffusion) and GPB15D (dry low emission) The applicable fuel for GPB15 is Natural Gas and Diesel Oil. Alternatively, the GPB15 series can be operated on dual fuel system.
Provide in-house power generation, normally coupled with waste heat recovery boiler to increase total efficiency which is called Cogeneration system.
|Electrical Output||1,450 kW|
|Heat Rate||15,280 kW|
|Exhaust Gas Temperature||534 ℃|
|Exhaust Gas Mass Flow||28.5 x10³ kg/hr|
|HRSG Steam Output||5.1 x10³ kg/hr|
|Total Thermal Efficiency||79.7%|
|NOx (02 : 15%)||25 ppm|
|Approximate Package Dimension (L,W,H)||5.3 x 1.65 x 2.35|
|Approximate Package Weight (dry)||11|
- Elevation 0m
- Inlet air temperature 15℃
- Inlet air pressure loss 0.98kPa
- Exhaust gas pressure loss 2.45kPa
- LHV of Natural Gas Fuel(100% CH4) 35.9MJ/Nm3
- Typical Steam ConditionSteam pressure 0.83MPaG, Steam temperature(saturated) 177℃, Feed water temperature 80℃, Blowdown from HRSG 0%
Note: Mark “D” means Dry Low Emission
Here’s how KGA help with your solution.
We’ll help you to size and design the right energy solution according to your needs.
We’ll work with qualified local partner for the cost-effective installation.
We’re always available to support the necessary services.